TB 19.14 – Reader Power Select Setting

Applies To: The Series 3 RSC-2, SSP-D2 (LP), and SSP-LX.

Issue: When replacing or upgrading an applicable board, the position of the Reader Power Select jumper may cause the reader to lose power.

Resolution: Verify that the position of the Reader Power Select jumper is in the correct position. The Reader Power Select jumper is set depending on the voltage (Vdc) requirements of the reader. This technical bulletin will explain how moving the Reader Power Select jumper enables how much power the reader receives.
Download Technical Bulletin (PDF):

  TB 19.14 - Reader Power Select Setting (321 KB)