Sub-Controllers

Choose from one door, two door, or IP-based "edge" door controllers as well as input and output modules and communication devices.

Sub-controller	Reader Ports	Inputs	Outputs	Speed	Power	Tamper
MR50-S3	1	2	2	38.4 kbps	12-24 vdc	1 - cabinet
MR52-S3	2	8	6	38.4 kbps	12-24 vdc	2 - cab/pwr
NSC-200	1 reader port- can support up to 4 readers (2 doors in/out) via OSDP only	6 programmable inputs	4 relay outputs set for fail safe or fail secure	Ethernet	PoE -OR- 12 vdc	n/a
RSC-DT	keypad + external reader port			38.4 kpbs	12 vdc	n/a
MR16IN-S3	n/a	16	2	38.4 kbps	12-24 vdc	2 - cab/pwr
MR16OUT-S3	n/a	n/a	16	38.4 kbps	12-24 vdc	2 - cab/pwr
OptoHub	n/a	n/a	n/a	Up to 115.2 kbps	12 vdc	n/a

NSC-200

The NSC-200 Network Door Module with PoE support provides the interface between local devices at the door and the SSP™ IP Series Controllers. Communication is done via TCP/IP in the standard network environment.

Features

Standard 10/100 Ethernet connection
PoE (Power over Ethernet)
6 reader ports available for in/out doors
4 programmable inputs
4 relay outputs set for fail safe or fail secure

Quick Specs

Power input:
PoE, 12.95W, Class 3, compliant to IEEE 802.3af -OR-
12 VDC ±10%, 1.7A max Power Supply.

strong>Power Output:
12VDC @ 700mA including reader and Aux. output

Outputs:
4 Form C contacts 2A @ 30VDC

Inputs:
6 programmable inputs, EOL 1k/1k ohm

Reader Power:
12VDC ±10%, 0.5A Max

Reader Data:
2-Wire RS-485, OSDP protocol, four devices Max.

Communication:
10Base-T/100Base-TX

Dimension:
7.75”L (197mm) x 5.50“W (140mm) x 2.1”H (53mm)

Weight:
12.8 oz. (360g) (without cables)

Documents

NSC 200 Datasheet (411 KB)

NSC200 Installation Manual (994 KB)

MR50-S3

The MR50-S3 is the perfect solution for almost any single door configuration and has an extra relay output for auxiliary device control.

Features

One reader port
2 programmable inputs
2 relay outputs
Stores 8 facility codes
Speeds up to 38,400 bits per second
Supports OSDP and Secure Channel>

Quick Specs - RSC-1 Series 3

Primary Power:
12 to 24VDC ± 10%, 12VDC @ 150mA maximum

Wiring Specifications:
Power: 1 twisted pair, 18 AWG min.
RS-485: 22 AWG, 4,000ft (1,200m) max., twisted pair with shield

Reader Ports:
1 Reader port*
Power: 12 to 24VDC +/- 10% (input voltage passed through)
LED: One-wire bi-color LED or two-wire LED
Buzzer: Only with 1-wire LED
Reader: OSDP, Clock/Data, Data1/Data0, RS-485, or F2F

* 2 readers (1 door) supported for entry/exit application when using OSDP readers

Inputs/Outputs:
2 General purpose: Programmable circuit type
1 dedicated: Tamper
Relay 1: Normally open (NO): 5A @ 30 Vdc resistive
Relay 1: Normally closed (NC): 3A @ 30 Vdc resistive
Relay 2: 2A @ 30 Vdc resistive

Mechanical:
Dimensions: 4.25 in. W x 2.75 in. L x 1.0 in. H (108mm W x 70mm L x 25.4mm H)
Weight: 4 oz. (120gm) nominal

Listing:
UL Listed ALVY2, CE

Documents

RSC-1 (Series 3) Datasheet (413 KB)

ReaderModules Datasheet (Series 2) (1.1 MB)

MR52-S3

The MR52-S3 supports two readers for two completely separate doors or an in/out configuration. The MR52-S3 also includes inputs and outputs beyond typical door configurations allowing for system expansion without the added cost.

Features

Two Reader ports
8 programmable inputs
6 relay outputs
Stores 8 facility codes
38,400 bits per second
Supports OSDP and Secure Channel

Quick Specs - RSC-2 Series 3

Primary Power:
12 to 24VDC ± 10%, 12VDC @ 550mA maximum

Wiring Specifications:
Power: 1 twisted pair, 18 AWG min.
RS-485: 22 AWG, 4,000ft (1,200m) max., twisted pair with shield

Reader Ports:

2 Reader ports*
Power: 12 to 24VDC +/- 10% Pass-through or 12 VDC regulated
LED: One-wire bi-color LED or two-wire LED
Buzzer: Only with 1-wire LED
Reader: OSDP, Clock/Data, Data1/Data0, RS-485, or F2F

* 4 readers (2 doors) supported for entry/exit application when using OSDP readers

Inputs/Outputs:
8 General purpose: Programmable circuit type
2 dedicated: 1 tamper and 1 power monitor each
6 Relays: Form-C, Normally open contact (NO): 5A @ 30 Vdc, Normally closed contact (NC): 3A @ 30 Vdc

Mechanical:
Dimensions: 6 in. W x 8 in. L x 1.0 in. H (152mm W x 203mm L x 25mm H)
Weight: 11 oz. (312gm) nominal

Listing:
UL Listed ALVY2, CE

Documents

RSC2 (Series 3) Datasheet (254 KB)

ReaderModules Datasheet (Series 2) (1.1 MB)

RSC-DT Display Terminal

The RSC-DT Display Terminal provides an interactive window into the access control system and displays text as sent by the SSP controller. This free-form messaging allows for applications beyond that of general access control.

Features

32 Character LCD Display
16 Position Keypad
Communicates via 485 (host or reader port)
Alternate Card Reader Port
Backlit Keypad and Display
Displays time: 12 or 24 hour format
Prompts user during door cycle
Customized text displayed
Prompts user for command
Command Feedback

Quick Specs

Primary Power:
DC input: 12 VDC ± 15%.
Current: 175 mA maximum (Terminal only)

Alternate Reader Port:
Power: Pass Through 12 VDC
Interface: 2-wire, Clock/Data or Data 1/Data 0
LED Control: 2-wire or 1-wire bi-color
Buzzer Control: Available only in 1-wire LED control mode
Alternate Reader Wiegand Data1/Data0, Magnetic Clock/Data, Proximity

Communication:
RS-485: 4,000 feet (1,219 m) max. 24AWG, 120 ohms impedance
Wiegand: 500 feet (152 m) max, 18AWG (alternate reader)

Environmental:
Temperature: Operating: 0°C to 50°C (32° to 122° F)
Storage: -20°C to +70°C (-4° to 158° F)
Humidity: 0 to 95% RHNC

Mechanical:
Dimensions: 6.75" W x 5.00" L x 1.00" D (172mm W x 127mm L x 25mm D)
Weight: 14 oz. (400g) nominal

Installation:
Mounting: Surface mount or 3-gang box

Documents

RSC-DT Datasheet (658 KB)

MR16IN-S3

The MR16IN-S3 delivers a cost-effective and flexible means of expanding the general input and alarm monitoring capability.

Features

16 programmable inputs
Analog to digital converter technology
2 programmable relay outputs
Speeds up to 38,400 bits per second

Quick Specs - ISC-16 Series 3

Power :

12 VDC-28 VDC +/- 10%, 350 mA maximum current

Wiring Specifications:

Power: 1 twisted pair, 18 AWG min.

RS-485: 24 AWG, 4,000ft (1,200m) max., twisted pair(s) with shield

Inputs: 1 twisted pair, 30 ohms max.

Outputs: As required per the load

Inputs/Outputs:

16 General purpose: Programmable circuit type, supervised

2 dedicated: 1 tamper and 1 power monitor each

2 Relays: Form-C, Normally open contact (NO): 5A @ 30 Vdc, Normally closed contact (NC): 3A @ 30 Vdc

Environmental:

Temperature: 0 to 70C operational, -55to 85C storage

Humidity: 0 to 95% RHNC

Mechanical:

Dimensions: 6.0 in. W x 8.0 in. L x 1.0 in. H (152mm W x 203mm L x 25mm H)

Weight: 10 oz. (290gm) nominal

Listings:

UL Listed ALVY2, CE

Documents

ISC16-(Series 3) Datasheet (486 KB)

IO Boards Datasheet (Series 2) (979 KB)

MR16OUT-S3

The MR16OUT-S3 is the clear choice when needing to expand the output capability of the system including general facility control, lighting, energy management, door and elevator control.

Features

16 programmable relay outputs
All relays support On, Off, Pulse, and Repeating Pulse commands
Fail Safe or Fail Secure
Speeds up to 38,400 bits per second

Quick Specs - OSC-16 Series 3

Power :

12 VDC-28 VDC +/- 10%, 1100 mA maximum current

Wiring Specifications:

Power: 1 twisted pair, 18 AWG min.

RS-485: 24 AWG, 4,000ft (1,200m) max., twisted pair(s) with shield

Outputs: As required per the load

Inputs/Outputs:

2 dedicated: 1 tamper and 1 power monitor each

16 Relays: Form-C, Normally open contact (NO): 5A @ 30 Vdc, Normally closed contact (NC): 3A @ 30 Vdc

Environmental:

Temperature: 0 to 70C operational, -55to 85C storage

Humidity: 0 to 95% RHNC

Mechanical:

Dimensions: 6.0 in. W x 8.0 in. L x 1.0 in. H (152mm W x 203mm L x 25mm H)

Weight: 16 oz. (454gm) nominal

Listings:

UL Listed ALVY2, CE

Documents

OSC-16 (Series 3) Datasheet (463 KB)

IO Boards Datasheet (Series 2) (979 KB)

OptoHub

The OptoHub is an optically isolated 485 multiplexer that allows you to provide a star topology for all downstream communications. This is ideal for most 485 applications as it makes for easy installation and simplifies troubleshooting of field devices. Each port is optically isolated preventing noise across ports and safeguarding the integrity of system communications

Features

Distribute 485 devices across system in star configuration
Single input into (8) downstream isolated ports
Protects against ground potential between ports
Speeds up to 115,200 bits per second
Status LEDs for each port show TX and RX activity
Option to convert RS-232 to RS-485 on host port
Ability to disable receive channel on each port
MET Labs Certified - UL 294 Compliant

Quick Specs

Power:

12 VDC +/- 15%, 300 mA

Wiring Specifications:

Power: 1 twisted pair, 18 AWG min.

RS-485: 24 AWG, 4,000ft (1,200m) max., twisted pair(s)
with shield

RS-232: 24 AWG, 25ft (7.6m) max.

Ports:

Host Port: RS-485/232 optional

Port 1-8: RS-485 transmit/receive

All ports support data rates up to 115.2 Kbps

Environmental:

Temperature: 0 to 70C operational,
-55 to 85C storage

Humidity: 0 to 95% RHNC

Mechanical:

Dimensions: 6.0 in. W x 8.0 in. L x 1.0 in. H
(152mm W x 203mm L x 25mm H)

Weight: 10 oz. (290gm) nominal

Listings:

MET Approved (UL-294 Compliant)

Documents

OptoHub Datasheet (375 KB)

Sub-Controllers

NSC-200

MR50-S3

MR52-S3

RSC-DT Display Terminal

MR16IN-S3

MR16OUT-S3

OptoHub

Related Products

Intelligent Controllers

Bridge Technology

Sub-Controllers

Enclosed Products

Get in touch